24/7 emergency service · A real person answers
Heating · Furnace repair

Fremont Furnace Repair, With a Safety Check on Every Visit

Furnace repair in Fremont covers gas and electric furnaces that will not light, blow cold air, short cycle or trip their safety switches. Most repairs, such as an igniter, flame sensor or pressure switch, cost $150 to $600. Every ComfortFlow heating visit includes a combustion and carbon monoxide safety check. Call (510) 602-2968 for a same-day appointment.

Fremont furnaces work hard for only a few months a year, and that is part of the problem. They sit idle all summer collecting dust, then the first cold, foggy morning in November reveals a cracked igniter or a dirty flame sensor. Many furnaces here live in garages, attics or hall closets of 1960s and 70s tract homes, and we know where to look.

Common furnace problems we fix

  • Furnace clicks but never lights, or lights then shuts off
  • Blower runs but the air is cold
  • Burning smell beyond the first few minutes of the season
  • Loud bangs at startup (delayed ignition)
  • Furnace runs constantly or cycles every few minutes
  • Blinking error code on the control board
  • Pilot light that will not stay lit on older units

Safety first

Every heating call includes a check of the heat exchanger, venting, gas pressure and carbon monoxide at the supply registers. If we ever find a cracked heat exchanger or a venting problem, we shut the gas off to the furnace, show you what we found and explain your options. We never use a safety finding as a sales pitch.

If you smell gas, leave the house and call PG&E at 1-800-743-5000 first, then call us.

Repair now, plan for later

Bay Area air district rules require new furnaces manufactured from 2029 to be zero-NOx, which in practice means electric heat pumps. You can keep repairing your current gas furnace for as long as it is safe. When it is time to replace it, we will compare a new furnace installation with a heat pump so you make the decision once. Our explainer on the Bay Area furnace and water heater rules covers the details.

Typical costs in Fremont

JobTypical range
Hot surface igniter$200–$450
Flame sensor clean or replace$150–$300
Pressure switch$250–$500
Inducer motor$600–$1,200
Control board$450–$900
Blower motor$600–$1,400

Ranges reflect recent Fremont-area jobs and change with equipment, access and parts. You get an exact, written price before any work starts.

Looking for more than one fix? ComfortFlow is a full-service HVAC company in Fremont, so one call covers heating, cooling and hot water.

Furnace repair: questions we hear often

Why does my furnace smell like it is burning?

A dusty smell for the first few minutes of the season is normal. A smell that lasts, or smells electrical, means turn it off and call us.

Can you repair older furnaces with a standing pilot?

Yes, and we carry thermocouples and pilot assemblies. We will also tell you honestly when a 30-year-old unit is past safe repair.

How much does furnace repair cost in Fremont?

Most repairs fall between $150 and $600. Motors and control boards cost more. You get a flat price before we start.

Do I need to replace my gas furnace because of the new rules?

No. The Bay Area rules apply to new appliances sold for installation from 2029 on. Your existing furnace can be repaired and used for its full life.

Do you check for carbon monoxide?

Yes, on every heating visit. We also recommend working CO alarms on every floor, which California requires in homes with gas appliances.

Too warm, too cold, or just not right?

Give us a call. We'll listen, ask a few questions and find a time that works for you.

Call nowRequest a visit